| Technical
Specifications |
SINGLE PHASE SERVO VOLTAGE STABILIZER |
| Rating |
5
kVA to 75 kVA |
| Input
Voltage Range |
4
standard Ranges or custom built |
| Over-Load
Capability |
up
to 150 % momentarily |
| Output
Voltage |
Standard
220 / 230 / 240 V. or as per customer requirement |
| Line
& Load regulation |
0.5%
or 1% |
| Duty
Cycle |
Continuous
24x7 |
| Wave
Form Distortion |
Nil
true to input |
| Response
Time |
Less
than 10ms |
| Correction
Speed |
Up
to 70V per sec. (Depend on Input Voltage
range & capacity) |
| Correction
Method |
Step-Less
correction using Auto Variable Transformer |
| Suitability |
Suitable
for all power factor loads |
| Cooling |
Natural
Air Cooled / Forced Air Cooled / Oil Cooled |
| Class
of Insulation |
Available
in E / B /F Class |
| Break
Down Strength & IR |
2500V
AC for 2 Minutes. Greater than 50 Mega Ohms
at 500V DC |
| No
Load Loss |
Less
than 0.4 % |
| Efficiency |
97
% to 99% (Depend on Input Voltage range
& capacity) |
| Ambient
Temperature |
Wide
ambient temperature operation from –20°
C to 45° C. |
| Winding
& Wiring Material |
Copper
EC grade (99.999% Pure) |
| MCCBs
& Switchgears |
Schneider/L&T/Siemens |
| Input
/ Output Termination |
On
Brass Studs/Connectors/Copper Bus Bar |
| Installation |
Indoor
& Out door type |
| Degree
of Protection |
IP
- 30 to IP - 55 |
| Optional
Features and Protections |
- Overload Cut-Off and Short Circuit Protection.
- Low / High Voltage (out of input range)
Alarm and / or Cut-Off.
- High Temperature Alarm and / or Cut-Off.
- Spike and surge protection
- Ammeter, Temperature Meter, Digital Ammeter,
Digital Voltmeter.
- Stabilizer By Pass System
- Remote control of stabilizer ( with wires
)
|
