Isolation Transforners - Manufacturer Isolation Transforners, Supplier Isolation Transforners, Exporter Isolation Transforners, India Isolation Transforners

	Isolation Transformer Isolation Transformer Ultra Isolation Transformer VENER7 Isoline power Line Noise Isolator is an ultra-isolation transformer which prevents passage of line voltage transient, spikes and galvanic leakages from reaching sensitive or critical equipment like Computers & its peripherals, Medical Instrumentation, Digital communication and Telemetry systems etc. Isoline range employs a unique multiple shielding technique that reduce the interwinding capacitance to below 0.009 pf and DC Isolation to over 100M ohms. Attenuation of common mode noise is about 100dB. Regulation at 400 or 415V AC is about 4 %.
* Filters Power Line Noise, Spikes and Transients.
* Isolates Sensitive Equipment's from Noisy Power Lines.
* Complete Electrostatic Shielding.
* Minimizing Common Mode Noise by Over 130dB.
* Minimizes Transverse Mode Noise.
* Line and Load Regulation better than ±3.5%.
* Quality Components, Conservating Ratings and Ruggedised Design for Best Long Term Value.

Rating	As per requirement
Input Voltage	400 or 415V +/- 10% (Phase to Phase) Star or Delta connected
Output Voltage	400 or 415V +/- 10% (Phase to Phase) Star or Delta connected
Ratio	1:1 Isolation Transformer
Regulation	+ / - 4%
Wave Form Distortion	Nil
Suitability	Suitable for all power factor loads
Cooling	Natural Air Cooled
Duty Cycle	Continuous 24x7
Spike Clamping Level	500V (Normal)
Spike Voltage	6kV (Max)
Spike Current	5kA (Max)
Response Time	5 Nano Sec
Break Down Strength	2500V AC for 120 Sec.
Insulation Resistance	Greater than 100 mega ohms at 500V DC
Class of Insulation	F Class
Installation	Indoor type
Degree of Protection	IP – 30
No Load Loss	Less than 0.5%
Efficiency	97 %.
Winding & Wiring Material	Copper EC grade (99.999% Pure)
Transformer	Heavy duty Copper Wound Transformer.
Input / Output Termination	On Brass studs / Connectors / Copper Bus Bar.